18650 30Q Li-ion Cylindrical Rechargeable Batteries

Share for a free gift.
18650 30Q Li-ion Cylindrical Rechargeable Batteries
Technical Specs.
Model No.INR18650-30Q
BrandSamsung SDI
Nominal Capacity3000mAh
Nominal Voltage3.6V
Standard ChargeCCCV, 1.5A, 4.20±0.05V, 150mA cut-off
Rapid ChargeCCCV, 4A, 4.20±0.05V,100mA cut-off
Charging TimeStandard Charge: 180 min / 150 mA cut-off
Rapid Charge: 70 min (at 25℃) / 100 mA cut-off
Max. Continuous Discharge15A (at 25 ℃),60% after 250 cycles
Discharge Cut-off Voltage2.5V
Nominal Discharge Capacity3000mAh
Charge: 1.5A, 4.20V, CCCV 150mA cut-off
Discharge: 0.2C, 2.5V discharge cut-off
Temp. Specs.
Charge Operating Temp.0~50℃
Recommended Recharge Release<45℃
Discharge Operating Temp.-20~75℃
Recommended Re-discharge Release<60℃
Storage Temp.1.5 Year, -30~25℃
3 Months, -30~45℃
1 Month, -30~60℃
Mechanical Specs.
Cell Weight48 G
Cell Dimension (D*H)18.33*64.85 MM
Package200 PCS/Carton
Other Specs.
CertificatesUN38.3, MSDS
High discharge rate 15A.
High energy density.
Good consistency.
High safety, non-toxic, non-contaminating.
Long cycle life, more than 700 cycles.
Good high temperature performance.
Grade A battery cell.
Widely used to power tools, as vape battery etc.
Here are some important notes on how to properly handle Li-ion cylindrical rechargeable battery cells:

Never carry loose cells – the li-ion cylindrical cells should be suitably cased at all times when not in use.

Do not short the li ion cylindrical cells with metallic objects.

Always use a battery charger designed for the li ion rechargeable cells you are charging.

Never leave a battery charger unattended.

Never completely discharge the li-ion cylindrical battery. The cut off for most cells is 2.8v or 2.5v.

Do not short cut the li ion rechargeable battery.

Do not disassemble or deform the 18650 rechargeable battery. Dispose it if the battery is deformed.

Do not immerse in water.

Avoid excessive physical shock or vibration.

Do not expose to, dispose of the li-ion cylindrical rechargeable battery in fire.

Please note that these precautions are necessary to ensure safety and prolong the life of your batteries.

18650 Battery Cell Holder

18650 battery cell holder

18650 Cell Holder Dimension

18650 cell holder dimensions

18650 Cell Holder

18650 cell holder

Nickel Battery Strip

nickel battery strip

Battery Nickel Strip

battery nickel strip Nickel Strip User Guide for 18650 Battery Packs
MaterialColumnWidth(mm)Row Space(mm)Thickness(mm)Cell Holder
Nickel Strip1718.50.12/0.15/0.2N/A
Nickel Strip225.518.50.12/0.15/0.2N/A
Nickel Strip34418.50.12/0.15/0.2N/A
Nickel Strip462.518.50.12/0.15/0.2N/A
Nickel Strip58118.50.12/0.15/0.2N/A
Nickel Strip699.518.50.12/0.15/0.2N/A
Nickel Strip711818.50.12/0.15/0.2N/A
Nickel Strip8136.518.50.12/0.15/0.2N/A
MaterialColumnWidth(mm)Row Space(mm)Thickness(mm)Cell Holder
Nickel Strip1720.20.12//0.15/0.2Yes
Nickel Strip22720.20.12//0.15/0.2Yes
Nickel Strip34720.20.12//0.15/0.2Yes
Nickel Strip467.620.20.12//0.15/0.2Yes
Nickel Strip587.820.20.12//0.15/0.2Yes
Nickel Strip610820.20.12//0.15/0.2Yes
Nickel Strip7128.220.20.12//0.15/0.2Yes
Nickel Strip8148.420.20.12//0.15/0.2Yes
How to solder 18650 battery nickel strip?

Soldering nickel strips to 18650 LiFePO4 cells can be done effectively with the right tools and steps. Here's a step-by-step guide:

Materials Needed:

- Soldering iron capable of 800-850°
- Wide soldering tip 5mm
- 60/40 rosin core solder
- Flux Pen
- Sanding Stick
- Tabbing, minimum 5mm
- Scissors
- Popsicle stick
- Combination Square
- Medium viscosity super glue
- Super glue accelerator


1. Clean the Battery and Nickel Strip: Use a sanding stick to clean the surface of the battery and the nickel strip where you will be soldering.

2. Apply Flux: Apply flux to the area where you will be soldering. This helps the solder flow and adhere better.

3. Heat the Soldering Iron: Heat your soldering iron to around 800-850°.

4. Apply Solder: Apply a small amount of solder to the tip of your soldering iron, then touch the tip to the area where you want to solder. The heat will transfer the solder to the nickel strip and battery, creating a bond.

5. Cool Down: Allow the soldered joint to cool down before handling it.

Remember, safety always comes first! Always work in a well-ventilated area and wear appropriate safety gear. Practice makes perfect, so don't be discouraged if your first few attempts don't go as planned.


How to Solder 18650


Customer Reviews


There are no reviews yet

Be the first to review “18650 30Q Li-ion Cylindrical Rechargeable Batteries”

Your email address will not be published. Required fields are marked *