Prismatic Batteries Sodium ion 220Ah
| Technical Specs. | |
| Nominal Capacity | 220Ah @0.5C |
| Typical Capacity | 225Ah @0.5C |
| Nominal Voltage | 3.1V |
| Battery Chemistry | Sodium ion |
| Charge Voltage | 3.95±0.05V |
| Discharge Cut-off Voltage | 1.5±0.05V |
| Impedance | ≤0.5mΩ |
| Energy Density | ≥155Wh/Kg |
| Max. Continuous Charge Rate | ≤0.2C @-10℃~0℃ |
| ≤0.5C @0℃~45℃ | |
| Max. Continuous Discharge Rate | ≤0.2C @-30℃~0℃ |
| ≤1.0C @0℃~45℃ | |
| ≤0.5C @-45℃~60℃ | |
| Max. Constant Charge Current | Constant Current 0.5C |
| Constant Voltage 3.95V | |
| 0.05C Cut-off | |
| Max. Constant Discharge Current | Constant Current 1.0C |
| Constant Voltage 1.5V | |
| Cycle Life | ≥4000 Cycles @0.5C, 80%SOC |
| Temp. Specs. | |
| Charge Operating Temp. | -10℃~45℃ |
| Discharge Operating Temp. | -30℃~60℃ |
| Storage Temp. | -20℃~40℃ |
| Mechanical Specs. | |
| Cell Weight | 4.4±0.2kg |
| Cell Dimension | 71.25±0.5mm*173.6±0.5mm*203.7±0.5mm |
| Other Specs. | |
| Certificates | UN38.3/MSDS/CE,etc. |
Prismatic Batteries Sodium ion Related Models
| Prismatic-50Ah | Prismatic Batteries Sodium Ion 50Ah |
| Prismatic-75Ah | Prismatic Batteries Sodium Ion 75Ah |
| Prismatic-210Ah | Prismatic Batteries Sodium Ion 210Ah |
| Prismatic-220Ah | Prismatic Batteries Sodium Ion 220Ah |
1, Each cell will come with 1 battery bus bar, 2 matchable nuts and 2 metal washers.
2, Any other item can be custom per your request.
Copper Battery Bus Bar
2, Any other item can be custom per your request.
Copper Battery Bus Bar
Sodium ion Battery BMS

Sodium ion Battery BMS Wiring Diagram
1, Start from the black balance wire, to connect it to the negative (B- as shown) of a sodium ion battery pack.
2, Then connect the first red balance wire that's next to the black one to the positive of the first series of the sodium battery pack.
3, Connect the second red balance wire to the positive of the second series fo the na ion batery pack, and so on, to the last red balance wire to the positive of the na battery pack (B+ as shown).
4, Use a multimeter to check each balance port and make sure each cell's voltage is correct.
5, If everything is correct, put the balance plug in the port of the BMS.

Sodium ion Battery BMS Parameter

Sodium ion Battery BMS Wiring Diagram
1, Start from the black balance wire, to connect it to the negative (B- as shown) of a sodium ion battery pack.
2, Then connect the first red balance wire that's next to the black one to the positive of the first series of the sodium battery pack.
3, Connect the second red balance wire to the positive of the second series fo the na ion batery pack, and so on, to the last red balance wire to the positive of the na battery pack (B+ as shown).
4, Use a multimeter to check each balance port and make sure each cell's voltage is correct.
5, If everything is correct, put the balance plug in the port of the BMS.

Sodium ion Battery BMS Parameter
Sodium ion Battery Chargers
There are several models available, for your reference, the most used models are listed here, including 24V 5A, 36V 5A, 48V 5A, 60V 5A, and 72V 5A.
There are several models available, for your reference, the most used models are listed here, including 24V 5A, 36V 5A, 48V 5A, 60V 5A, and 72V 5A.



Reviews
There are no reviews yet